Sawbuck Saddle Plans

🔥+ Sawbuck Saddle Plans 07 Jul 2020 1 scrap piece of wood for a trigger. A wooden skewer. A wooden tooth pick. The basic design is a cross shape, I've used batten for ...

Sawbuck Saddle Plans Home plans and house plans by Frank Betz Associates, cottage home plans, country house plans, and more.

DIY Dog House With Pallets

Sawbuck Saddle Planshow to Sawbuck Saddle Plans for Written, Photographed and Video by Skaie Knox, HomeJelly

Like fashion, home decor styles are often in one year, out the next. However, when it comes to mid-century modern design, it seems we’ve had a never-ending love affair with its characteristic clean lines and gentle organic curves. Today’s project splendidly captures the spirit of this always-on-trend aesthetic.

Sawbuck Saddle Planshow to Sawbuck Saddle Plans for Now, if you’re like me, and view your house plants like close personal friends (I’ve even named mine, “Robert”), then you’ll love this adorable 3-legged, mid-century modern planter holder you can DIY in just three easy steps. With only a few items, found at local box stores like Target, Home Depot, and Lowes, you’ll have an enduring showpiece (and a very happy BFF – best floral friend), that’s chic and cute at the same for 1 last update 2020/07/07 time.), that’s chic and cute at the same time.

Supplies:

Instructions:

Sawbuck Saddle Planshow to Sawbuck Saddle Plans for Step #1: Spray paint metal on leg tips. Here, you’ll want to tape off the wooden part of the leg to avoid overspray. Tip: place legs upside down in an egg crate to dry.

Step #2: Stain the wooden legs the same color as your bowl. This will make your stand look totally custom. Tip: if you’ve got several stains at home, paint a test strip to compare to your bowl. If you need to pick up some at the store, ask the paint associate to help you. The folks at Home Depot even allowed me to make a test strip right in the store…it never hurts to ask!

Step #3: Attach three steel angle top plates, then screw in the legs. To find the measurement, use this guide:

Sawbuck Saddle Planshow to Sawbuck Saddle Plans for

Print the guide, then place on your wooden bowl. Each “x” is 120° apart and where you should place the center of each plate.

Mark the pre-drill holes for the plates with a pencil. Drill holes, (it’s okay to go all the way through), then screw into place.

Sawbuck Saddle Planshow to Sawbuck Saddle Plans for Add a washer to the center hole, then screw in your legs. Because the leg screws are a little long – they don’t sit flush to the angle plates – you can add a washer to create a tight fit.

Extra the 1 last update 2020/07/07 Details!Extra Details!

I’m all about adding personality to whatever I DIY, so, I’ve included a couple pinstripes. I simply started at the 1 last update 07 Jul 2020 the base with a line of tape, then added four more lines. After removing two lines of tape, I now had even stripes. I’m all about adding personality to whatever I DIY, so, I’ve included a couple pinstripes. I simply started at the base with a line of tape, then added four more lines. After removing two lines of tape, I now had even stripes.

I thought it gave the planter stand a little something special (I even added a few MCM-inspired sparkles!). Feel free to add whatever design and color that makes you happy!

You Might Also Like...

Sawbuck Saddle Planshow to Sawbuck Saddle Plans for Craft a Coastal Tic-Tac-Toe Board & Serving Tray

May 23, 2019

Creating a Rustic, Neutral Little “Getaway” Space with Universal Furniture…

Sawbuck Saddle Planshow to Sawbuck Saddle Plans for November 14, 2019

Introducing Spaces

September 14, 2018
Previous for 1 last update 2020/07/07 PostPrevious Post Take The Guesswork Out of Setting Fees
Sawbuck Saddle Planshow to Sawbuck Saddle Plans for Next Post Introducing Spaces

No Comments

    Leave a Reply Cancel Reply

    Sawbuck Saddle Planshow to Sawbuck Saddle Plans for

    Copyright 2019. All Rights Reserved. Universal FurnitureCopyright 2019. All Rights Reserved. Universal Furniture